Installation Guide

-of-13

INSTALLATION GUIDE FOR LOM8408ABA,

LOM8408 9 9MBK, LOM840 ABA, LOM840 MBK

LOM84 ABA and MBK11 LOM8411

CARE AND MAINTENANCE

SAFETY INFORMATION

Released Date: 2021-08-19

• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean ﬁxture as they may damage

the ﬁnish.

If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at

www.quoizel.com.

Please read and understand this entire manual before attempting to assemble, install or operate the product.

WARNING

• RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.

• RISK OF FIRE - Use bulbs speciﬁed by the markings and/or labels on the ﬁxture.

CAUTION

• For your safety, read instructions completely before beginning installation.

• If in doubt about electrical installation, consult a licensed electrician.

• Turn off electricity to ﬁxture before replacing the bulb(s).

TOOLS REQUIRED

PACKAGE CONTENTS

Crossbar Assembly

Fixture Body

x 1

MOUNTING HARDWARE

Glass Shade

Wire Connector

Outlet Box Screw

Alternate

Mounting Screw

Lock Ball

x 1

Arm

x 1

Socket Collar

[pre-assembled to

Fixture Body]

PAGE 1
INSTALLATION GUIDE FOR LOM8408ABA, LOM8408 MBK, LOM840 9 ABA, LOM840 9 MBK LOM84 11 ABA and LOM8411 MBK SAFETY INFORMATION Released Date: 2021-08-19 Please read and understand this entire manual before attempting to assemble, install or operate the product. WARNING • RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box. • RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
PAGE 2
INSTALLATION 1 Install Arm 2 Install Inner Backplate 1 2 (2) Alternative Screws * Alternative screws are provided to replace pre-assembled mounting screws if necessary. 3 Wiring White wire from supply White from fixture Black (or red) wire from supply Black from fixture Ground wire from supply 4 Install Fixture Body 6 Install Bulb Ground wire from fixture Green ground screw 5 Install Glass Shade Install the correct bulb referring to fixture markings and/or labels for maximum wattage.
PAGE 3
INSTALLATION 7 Apply Caulking Ex te rio rC au Ex lk te rio rC au lk E xterior C aulk E xteri or C aulk * Note: Do NOT caulk the bottom of the backplate to allow moisture to escape. E x te E x te ri o r Cau lk Your installation is now complete! Restore electricity and save this sheet for future reference.