Installation Sheet

ManualsBrandsQuoizel ManualsLightingMarine 1 Light 10" Wide Outdoor Pendant Lantern with Vintage Edison Bulb and Clear Seedy Glass

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

or visit us on-line at www.quoizel.com

1of6

Part

Description

Quantity

A Crossbar

Nipple

1pc.

2 pcs.

1pc.

Hex Nut

Package Contents

Canopy Chain Loop

Lock Washer

1pc.

Canopy Lock Ring

1pc.

Fixture Chain

Ceiling Canopy

Fixture Loop

2015 Quoizel Inc.

December2015

1pc.

Fixture Body

1pc.

Bulb

Shade

Cage

2 pcs.

Washer

2 pcs.

Lock Ball

Rev.B

J K

L M

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing

the fixture. We strongly recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool

before removal. Do not subject glass parts to any shock while in operation or shattering may result.

Assembly Instruction Sheet #IS-MRE1909WT

For Style MRE1909WT

Pleasegoto forproductcleaningtips.Gotothe selection.

(1)MediumBaseDecorativeFilament60Wbulb(provided),Maximum100W,Alternatebulb(1)23W

CFLMaximum.

20-30minutes

Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagrams

belowtobesureallpartsarepresent.Ifanypartsaremissingordamaged,donotattempttoassemble,install,or

operatethefixture.Contactcustomerserviceforreplacementparts.

www.quoizel.com Care+Maintenance

LightSource:

EstimatedAssemblyTime:

Preparation:

ToolsRequired:Flatheadscrewdriver, Phillips screwdriver,pliers,wirecutters,wirestrippers,electricaltape,safety

glasses.

6 CORPORATE PARKWAY

GOOSE CREEK SC 29445

www quoizel com

Summary of content (6 pages)

PAGE 1
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-MRE1909WT For Style MRE1909WT Please go to www.quoizel.com for product cleaning tips. Go to the Care + Maintenance selection. Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses. Light Source: (1) Medium Base Decorative Filament 60W bulb (provided), Maximum 100W, Alternate bulb (1) 23W CFL Maximum.
PAGE 2
MRE1909WT FINISH: WESTERN BRONZE 6” Dia. QUOIZEL GND 2.4mm 13Ga R 1” Overall Height 118.5” (Includes 96” Chain) 1 20” 12” 2 3 6 . 5” Dia. 9” Dia. (1)Medium Base Decorative Filament 60W bulbs (provided), Maximum 100W. NO. PART NUMBER 1 M2100CHWT 2 3 NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4" REPLACEMENT PART DESCRIPTION QTY. CHAIN WESTERN BRONZE 3.8MM X 48” 1 G3636SH GLASS CLEAR SEEDY 6.5”D 1 I1101EC REPRODC 60 1910 INCANDESCENT BULB 1 2of6 Rev.
PAGE 3
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-MRE1909WT For Style MRE1909WT STEP 1 - Attach Fixture Loop to Fixture Body Fixture Loop A. Thread Fixture Loop (I) onto the Fixture Body (J), hand tighten until snug. Fixture Body Figure 1 STEP 2 - Install Bulb Figure 2 A. This fixture uses Medium Base Decorative Filament 60W bulb (K), Maximum 100W. Insert bulb and screw snugly into place. Socket Bulb STEP 3 - Attach Shade to Fixture Body Figure 3 A.
PAGE 4
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-MRE1909WT For Style MRE1909WT STEP 4 - Attach Cage to Fixture Body Lock Ball A. Pass the Bolt on the top of Cage (I) though the Hole on the Fixture Body (F),place the Washer (J) over the Bolt, secure by thread the Lock Ball (K) onto the Bolt on the top of Cage (I). Hand tighten until snug. Fixture Body Washer Hole Bolt Cage Figure 4 STEP 5 - Attach Crossbar to Outlet Box Outlet Box A.
PAGE 5
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-MRE1909WT For Style MRE1909WT STEP 7 - Attach Canopy Chain Loop to Nipple A. Thread another Hex Nut (D) onto the end of the Nipple (B). B. Place the Lock Washer (C) over the end of the Nipple (B) and then thread the Canopy Chain Loop (E) onto the end of the Nipple (B). C. Using pliers, thread the Hex Nut (D) against the Canopy Chain Loop (E) and hand tighten until snug.
PAGE 6
CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-MRE1909WT For Style MRE1909WT STEP 10 - Pass Supply Wires through Fixture Chain A. Pull the Supply Wires and Ground Wire up through the Fixture Chain (G) alternating links. Push the wires up through the Canopy Chain Loop (E) into the outlet box. Canopy Chain Loop Fixture Chain Supply Wire and Ground Wire Figure 10 STEP 11 - Make Wire Connections A.