Installation Guide

-of-13

INSTALLATION GUIDE

CARE AND MAINTENANCE

SAFETY INFORMATION

Released Date: 202 -2 08-30

Please read and understand this entire manual before attempting to assemble, install or operate the product.

WARNING

• RISK OF ELECTRIC SHOCK - Before beginning installation, turn oﬀ electricity at the circuit breaker box or the main fuse box.

• RISK OF FIRE - Use bulbs speciﬁed by the markings and/or labels on the ﬁxture.

CAUTION

• For your safety, read instructions completely before beginning installation.

• If in doubt about electrical installation, consult a licensed electrician.

• Turn oﬀ electricity to ﬁxture before replacing the bulb(s).

TOOLS REQUIRED

Fixture Body

x 1

Inner Backplate

x 1

PACKAGE CONTENTS

MOUNTING HARDWARE

Wire Connector

Outlet Box Screw

Mounting Screw

FOR NOE8407MBK and NOE8409MBK

• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean ﬁxture as they may damage

the ﬁnish.

If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at

www.quoizel.com.

PAGE 1
INSTALLATION GUIDE FOR NOE8407MBK and NOE8409MBK SAFETY INFORMATION Released Date: 202 2 - 08-30 Please read and understand this entire manual before attempting to assemble, install or operate the product. WARNING • RISK OF ELECTRIC SHOCK - Before beginning installation, turn oﬀ electricity at the circuit breaker box or the main fuse box. • RISK OF FIRE - Use bulbs speciﬁed by the markings and/or labels on the ﬁxture. CAUTION • For your safety, read instructions completely before beginning installation.
PAGE 2
INSTALLATION 1 Remove Cage and EPE 2 Install Bulbs Install two correct bulbs referring to ﬁxture markings and/or labels for maximum wattage.
PAGE 3
INSTALLATION Apply Caulking Your installation is now complete! Restore electricity and save this sheet for future reference. * Note: Do NOT caulk the bottom of the backplate to allow moisture to escape. rC rio te Ex Ex ter io r au Ca lk u lk 6 E x te r io r Cau lk HOW TO REPLACE GLASS SHADE 1 Remove Fixture Body 2 Remove Glass Shade - 3 of 3 - Reverse above steps to reinstall the replacement Glass panels onto ﬁxture.