Installation Guide

ManualsBrandsQuoizel ManualsPost Light PartsNY9042K

Part

Description

Quantity

1pc.

3 pcs.

Finial

Package Contents

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing

the fixture. We strongly recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool

before removal. Do not subject glass parts to any shock while in operation or shattering may result.

Mounting Screw

Assembly Instruction Sheet #IS-NY9042K_R1

For Style NY9042K

1of5

Waterproof Washer

Fixture Hood Assembly

Pleasegoto forproductcleaningtips.Gotothe selection.

(2)CandelabraBase60WMaximum

20-30minutes

Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagrams

belowtobesureallpartsarepresent.Ifanypartsaremissingordamaged,donotattempttoassemble,install,or

operatethefixture.Contactcustomerserviceforreplacementparts.

www.quoizel.com Care+Maintenance

LightSource:

EstimatedAssemblyTime:

Preparation:

ToolsRequired: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety

glasses.

1pc.

Center Stem

1pc.

Fixture Body

6 CORPORATE PARKWAY

GOOSE CREEK SC 29445

www quoizel com

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184

or visit us on-line at www.quoizel.com

2016 Quoizel Inc. RevisedDate:2016-06-28

Summary of content (5 pages)

PAGE 1
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-NY9042K_R1 For Style NY9042K Please go to www.quoizel.com for product cleaning tips. Go to the Care + Maintenance selection. Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
PAGE 2
NY9042K FINISH: MYSTIC BLACK 2 3 21” 1 11” Dia (2) 60W Candelabra base bulbs (not Supplied) NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4" NO. PART NUMBER 1 M12966CCW 2 9544KIT 3 M2221FIK REPLACEMENT PART DESCRIPTION QTY.
PAGE 3
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-NY9042K_R1 For Style NY9042K STEP 1 - Drill Pilot Holes on Post A. Carefully fit the Post Fitter over the end of the Post (not supplied), making sure the Post Fitter is fully seated. B. Mark the drill point for the (3) Mounting Screws, using (3) Mounting Holes as reference. After marking hole locations, remove fixture from post and drill 1/16” pilot holes for screws.
PAGE 4
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-NY9042K_R1 For Style NY9042K STEP 3 - Attach Fixture Body to Post A. Coat the top 1” of the Post with Clear Silicone Caulk (not supplied) and position the Post Fitter onto the Post. Be sure to seat it completely, aligning the holes in the Fitter with the 1/16” Pilot Holes drilled into the Post. B. Secure the Fixture to Post with (3) Mounting Screws.
PAGE 5
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-NY9042K_R1 For Style NY9042K STEP 5 - Install Bulb Bulb A. This fixture uses standard bulb with a candelabra screw base. Maximum 60 watts. B. Insert bulb and screw snugly into place. Socket Figure 6 STEP 6 - Attach Fixture Hood to Fixture Body a. Place the Fixture Hood Assembly (D) over the top end of the Center Stem (E), attach to the top edge of the Cage.