Installation Guide

ManualsBrandsQuoizel Manualspost lightsOAS9011Z

Part

Description

Quantity

1pc.

3 pcs.

Finial

Package Contents

Quoizel, Inc.

6 Corporate Parkway

Goose Creek, SC

29445

Customer Service

Phone 631.273.2700

Fax 631.231.7102

www.quoizel.com

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing

the fixture. We strongly recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool

before removal. Do not subject glass parts to any shock while in operation or shattering may result.

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

or visit us on-line at www.quoizel.com

2013 Quoizel Inc.

Mounting Screw

Assembly Instruction Sheet #IS-OAS9011Z

For Style OAS9011Z

1of5

Tools Required:Flatheadscrewdriver,Phillipsscrewdriver, pliers, wire cutters, wire

strippers,electricaltape,safety glasses.

EstimatedAssemblyTime:20-30 minutes

BulbRecommended: (4)CandelabraBase60WMaximum

Preparation:Identifyandinspect all parts before beginning installation.Checkpackage

contentlistanddiagrams below to be sure allpartsarepresent.Ifany parts are missing

ordamaged,donot attempt to assemble, install, or operatethefixture.Contactcustomer

serviceforreplacementparts.

6 CORPORATE PARKWAY

GOOSE CREEK SC 29445

www quoizel com

June2013

1pc.

Fixture Body

Fixture Hood

1pc.

Water Proof Washer

1pc.

Center Stem

Summary of content (5 pages)

PAGE 1
Assembly Instruction Sheet #IS-OAS9011Z For Style OAS9011Z 6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Quoizel, Inc. 6 Corporate Parkway Goose Creek, SC 29445 Customer Service Phone 631.273.2700 Fax 631.231.7102 www.quoizel.com Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
PAGE 2
OAS9011Z FINISH: MEDICI BRONZE 1 11” 26.5” (4) 60W candelabra base bulbs (not Supplied) NO. PART NUMBER 1 9544KIT NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2" REPLACEMENT PART DESCRIPTION MOUNTING KIT SELF TAPPING SCREWS (3) PER SET 2of5 REQ.
PAGE 3
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-OAS9011Z For Style OAS9011Z STEP 1 - Install Bulb A. This fixture uses standard bulb with a candelabra screw base . Maximum 6 0 watts. B. Insert bulb and screw snugly into place. STEP 2 - Assembly Fixture Hood to Fixture Body A. Thread Center Stem (F) onto Fixture Body (E), hand tighten until sung. B.
PAGE 4
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-OAS9011Z For Style OAS9011Z STEP 3 - Drill Pilot Holes on Post A. Carefully fit the Post Fitter over the end of the Post (not supplied), making sure the Post Fitter is fully seated. B. Mark the drill point for the (3) Mounting Screws, using (3) Mounting Holes as reference. After marking hole locations, remove fixture from post and drill 1/16” pilot holes for screws.
PAGE 5
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-OAS9011Z For Style OAS9011Z STEP 5 - Attach Fixture Body to Post A. Coat the top 1” of the Post with Clear Silicone Caulk (not supplied) and position the Post Fitter onto the Post. Be sure to seat it completely, aligning the holes in the Fitter with the 1/16” Pilot Holes drilled into the Post. B. Secure the Fixture to Post with (3) Mounting Screws. Post Fitter Your fixture is now assembled and ready to use.