Installation Sheet

Package Contents
1of2
For Style PCSQ8532C
A
Crossbar
x1
Pleasegoto forproductcleaningtips.Gotothe selection.
IntegratedLED53W
20-30minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtoensureallpartsare
present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactyouroriginalplaceofpurchase.
www.quoizel.com Care+Maintenance
LightSource:
EstimatedAssemblyTime:
Preparation:
ToolsRequired:Flatheadscrewdriver, Phillips screwdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.
Glass Shade
x1
Figure 1
STEP 2 - Install the Crossbar to the outlet box
A. Place the supply wires and ground wire through the Crossbar (A).
Attach the Crossbar (A) to the outlet box with the head of the green
ground screw facing you. Secure it with outlet box screws (not
included). Tighten until snug with screwdrivers.
STEP 3 - Wire Connections
A. Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
green ground screw.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Figure 2
Green Ground Screw
on the Crossbar
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
Installation Guide #IS-PCSQ8532C
2018 QuoizelInc.
ReleasedDate:2018-08-13
visit us on-line at www.quoizel.com
Mounting Screw
x2
B
E
STEP 4 - Install the Fixture
Body
A. Place the backplate of the
Fixture Body (F) onto the
Crossbar (A) and secure
with Mounting Screws (B).
Tighten until snug with
screwdrivers.
Your fixture is now
assembled and ready to use.
Enjoy!
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Outlet Box
Outlet Box Screw
(not included)
Supply Wires
with Ground Wire
A
Green Ground Screw
A
F
B
Backplate
Figure 3
Lock Screw
x2
C
End Cap
x2
D
Fixture Body
x1
F
STEP 1 - Install the Glass Shade
A. Attach one End Cap (D) to one end of the Fixture Body (F) and
secure with one Lock Screw (C). Hand tighten until snug with
screwdrivers.
B. Place the Shade (E) onto the Fixture Body(F) and attach another
End Cap (D) to another end of the Fixture Body (F). Secure with the
Lock Screw (C) and hand tighten until snug with screwdrivers.
E
F
D
C
Figure 4