Instruction Manual
NIPPLE
HEX NUT
SHAKE PROOF
WASHER
FIGURE 1
SUPPLY WIRE and
GROUND WIRE
BACKPLATE
LOCK BALL
SHADE
HOLDER
SOCKET
SHADE
SOCKET COLLAR
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
INSTALLATION INSTRUCTION
1 Before beginning the installation carefully unpack and identify all parts
referring to the illustration FIGURE1
2 Turn the electrical power to the installation point OFF at circuit breaker
3 Fasten the UNIVERSAL CROSSBAR to the OUTLET BOX using
2 OUTLET BOX SCREWS not supplied Thread one end of NIPPLE
into mounting hole on the center of UNIVERSAL CROSSBAR Proceed
to position SHAKE PROOF WASHER and HEX NUT onto NIPPLE Snug
HEX NUT against CROSSBAR with pliers to secure
4
Using wire connectors not supplied connect the HOUSE
GROUND WIRE to FIXTURE GROUND WIRE connect the HOUSE WHITE
WIRE to the FIXTURE WHITE or RIBBED WIRES connect the HOUSE
BLACK or RED WIRE to the FIXTURE BLACK or SMOOTH WIRE
Make sure that there are no exposed wires or strands and wrap each
connection with approved electrical tape
5 Carefully tuck all wiring into the OUTLET BOX and position the
BACKPLATE over the NIPPLE on the CROSSBAR Pass the CENTER
HOLE on BACKPLATE over NIPPLE Thread LOCK BALL onto NIPPLE
and hand tighten until snug
6 Position SOCKET through the hole on the bottom of SHADE Secure
SHADE by threading SOCKET COLLAR onto SOCKET Hand tighten
untill snug
7 Install bulb s referring to fixture markings and or labels for maximum
wattage
8 Restore electrical power to the installation
.
. .
.,
() ( ).
.
.
.:()
)(
();
() ( ).
.
.,
.
.
.
.
./
.
..
,,
.
.
.)
;
.
.
.
()
Make the wiring connections (Quoizel recommends 2 people for the
next 2 steps
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN!
IS PF8601
2006 4 25
-
--
GND
QUOIZEL
OUTLET BOX
UNIVERSAL
CROSSBAR
()
()
2 OUTLET BOX
SCREWS
not supplied
GREEN GROUND
SCREW