Installation Guide

ManualsBrandsQuoizel ManualsFloor LampsQ1074FPN

Part

Description

Quantity

1pc.

Shade

Package Contents

Quoizel, Inc.

6 Corporate Parkway

Goose Creek, SC

29445

Customer Service

Phone 631.273.2700

Fax 631.231.7102

www.quoizel.com

ToolsRequired:None

EstimatedAssemblyTime:15-20minutes

Preparation:Identify andinspect allparts beforebeginning installation.Check package

contentlist anddiagrams belowto besure allparts arepresent. Ifany partsare missing

ordamaged, donot attemptto assemble,install, oroperate thefixture. Contactcustomer

servicefor replacementparts.

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing

the fixture. We strongly recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool

before removal. Do not subject glass parts to any shock while in operation or shattering may result.

Assembly Instruction Sheet #IS-Q1074FPN

For Style Q1074FPN

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

or visit us on-line at www.quoizel.com

1of4

BulbRecommended: (1) MediumBase 100WMaximum

1pc.

Finial

6 CORPORATE PARKWAY

GOOSE CREEK SC 29445

www quoizel com

1pc.

Socket Assembly

2012 Quoizel Inc. April2012

Harp

Rod

Rod with Connecter

1pc.

Base

Summary of content (4 pages)

PAGE 1
Assembly Instruction Sheet #IS-Q1074FPN 6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com For Style Q1074FPN Tools Required: None Quoizel, Inc. 6 Corporate Parkway Goose Creek, SC 29445 Customer Service Phone 631.273.2700 Fax 631.231.7102 www.quoizel.com Bulb Recommended: (1) Medium Base 100W Maximum Estimated Assembly Time: 15-20 minutes Preparation: Identify and inspect all parts before beginning installation.
PAGE 2
Q1074FPN 15”Dia. FINISH: PALLADIAN BRONZE 7”Dia. 11” 2 61” 1 (1)100W Medium Base Bulbs (Not Supplied) NO. PART NUMBER 1 11074FPNQ 2 S1265WH 10”Dia. NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2" REPLACEMENT PART DESCRIPTION REQ.
PAGE 3
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-Q1074FPN For Style Q1074FPN STEP 1 - Assemble Rod and Socket Assembly Figure 1 A. Thread the Rod (E) and Rod with Connecter (F) to the Base (G) as shown. Hand tighten until snug. B. Thread the Socket Assembly (B) into the top end of Rod (E). Hand tighten until snug. STEP 2 - Assemble Harp A. Locate the Harp (A) by pressing the bottom ends of the Harp (A) into the Harp Clips.
PAGE 4
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-Q1074FPN For Style Q1074FPN STEP 3 - Assemble Shade A. Place the center hole on the top of the Shade (D) over the nipple at the top end of the Harp (A). Secure the Shade (D) by threading the Finial (C) onto the Harp (A). Hand tighten until snug. Finial Shade Harp Figure 3 STEP 4 - Install Bulb A. This fixture uses standard bulbs with medium screw bases. Maximum 100 watts. B.