Installation Guide

Pleasegoto forproductcleaningtips.Gotothe selection.
(1)MediumBase3-Way150WMaximum,Alternatebulb(1)42WCFL
20-30minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtobesureallpartsare
present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomerserviceforreplacement
parts.
www.quoizel.com Care+Maintenance
BulbRecommended:
Estimated Assembly Time:
Preparation:
ToolsRequired:Flatheadscrewdriver, Phillips screwdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.
Warnings and Cautions
1of1
Assembly Instruction Sheet #IS-Q1914T
For Style Q1914T
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2014 QuoizelInc.
December2014
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
A. Insert the Harp by pressing the bottom ends of the Harp into the harp
clips.
B. Place the Shade onto the top end of the Harp and secure with the
Finial. Hand tighten until snug.
C. This fixture uses standard bulb with standard screw base3-way,
Maximum150 watts. Insert bulb and screw snugly into place.
Your fixture is now assembled and ready to use. Enjoy!
Finial
X1
Shade
X1
Q1914T
PART NUMBER
11914TQ
S1644WL
NOTE: ALL DIMENSIONS ARE ROUNDED
UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
BASE
FABRIC SHADE
NO.
1
2
REQ.
1
1
Bulb (not
included)
Harp
X1
INSTALLATION
Base
X1
Socket
Harp Clip
(1) 150W
Bulb
(Not Supplied)
Medium
Base 3-Way
1
2
26”
10”
15”Dia.
16”Dia.
6.5”Sq.