Installation Guide

1of1
Assembly Instruction Sheet #IS-Q2588TPK
For Style Q2588TPK
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2016 Quoizel Inc.
January2016
Q2588TPK
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
Pleasegoto forproduct cleaningtips. Goto the selection.
(1)A19MediumBase 75Wbulb Maximum,Alternatebulb(1) 19WCFLMaximum.
15-20minutes
Identifyand inspectall partsbefore beginninginstallation. Checkpackage contentlist anddiagrams belowto besure allparts are
present.If anyparts aremissing ordamaged, donot attemptto assemble,install, oroperate thefixture. Contactcustomer servicefor replacement
parts.
www.quoizel.com Care+ Maintenance
Estimated Assembly Time:
Preparation:
Tools Required: None.
LightSource:
A. Place Shade over the Socket, secure by threading Socket Collar
onto the Socket, hand tighten until sung.
B. This fixture uses standard bulb with medium base . Maximum 75
watts. Insert bulb and screw snugly into place.
C. Adjust the light source to proper location by adjust the
Adjustment Buttons.
Your fixture is now assembled and ready to use. Enjoy!
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/4"
(1) 75W
Bulbs
(Not Supplied)
Medium
Base
Cord
PART NUMBER REPLACEMENT
REQ.
NO.
1
2
Socket Collar
X1
FINISH: POLISHED NICKEL
Fixture
Body
x1
Shade
X1
Socket
Bulb
26.75”
3.5”
16.25”
7.75”
3”
8”Sq.
Switch
Adjustment
Button