Installation Guide

1of1
Assembly Instruction Sheet #IS-Q2589FPK
For Style Q2589FPK
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2016 Quoizel Inc.
January2016
Q2589FPK
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
Pleasegoto forproduct cleaningtips. Goto the selection.
(1)A21MediumBase 150Wbulb Maximum,Alternatebulb
15-20minutes
Identifyand inspectall partsbefore beginninginstallation. Checkpackage contentlist anddiagrams belowto besure allparts are
present.If anyparts aremissing ordamaged, donot attemptto assemble,install, oroperate thefixture. Contactcustomer servicefor replacement
parts.
www.quoizel.com Care+ Maintenance
Estimated Assembly Time:
Preparation:
Tools Required: None.
LightSource: (3-Way) (1)CFL(3-Way).
A. Thread the Socket Assembly,
the Column, the Rod, the Rod
with Connector and the Base
together as shown. Hand
tighten until snug. Pull the
cordfromtheBaseasyou
assemble the parts together to
remove the excess cord
between parts.
B. Insert the Harp by pressing the
bottom ends of the Harp into
the Harp Clips.
C. Place the Shade onto the top
end of the Harp. Secure with
the Finial and hand tighten
until snug.
D. This fixture uses standard
bulb with medium base .
Maximum 150 watts. Insert
bulb and screw snugly into
place.
Your fixture is now assembled
Finial
x1
NOTE: ALL DIMENSIONS
ARE ROUNDED UP
TO THE NEAREST 1/4"
Base
x1
Cord
PART NUMBER REPLACEMENT
REQ.
NO.
1
2
Shade
x1
Bulb
Harp
X1
FINISH: POLISHED NICKEL
Rob with
Connector
x2
Rob
x1
Rob with
Connector
Column
x1
Socket
Assembly
x1
16.5”Dia.
15.5”Dia.
11.5”
63.75”
11”Dia.
(1) 150W
Bulb (3-Way)
(Not Supplied)
Medium
Base
S12743FA SHADE 1
1