Installation Guide

1of1
Assembly Instruction Sheet #IS-Q2606F
For Style Q2606F
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2016 Quoizel Inc.
January2016
A. Insert the nipple on
the Tube into the
Base. Place Lock
Washer over the
nipple, secure by
using Wrench
thread the Hex Nut
onto the nipple,
hand tighten until
snug.
B. Connect the Quick
Connectors.
C. Insert Socket
Assembly into the
Tube. Line up the
hole on the Tube
and the mounting
hole on the Socket
Assembly, secure by
threading Lock
Screw into the
mounting hole.
Hand tighten until
sung.
D. This fixture uses
Medium Base
Decorative Filament
60W bulb, Maximum
100W. Insert bulb
and screw snugly
into place.
Your fixture is now
assembled and
ready to use. Enjoy!
Q2606F
NOTE:
ALL DIMENSIONS ARE
ROUNDED UP TO THE
NEAREST 1/4"
Pleasegoto forproduct cleaningtips. Goto the selection.
(3)Medium BaseDecorative Filament60W bulb(provided), Maximum100W,Alternate bulb(3) 23WCFLMaximum.
15-20minutes
Identifyand inspectall partsbefore beginninginstallation. Checkpackage contentlist anddiagrams belowto besure allparts are
present.If anyparts aremissing ordamaged, donot attemptto assemble,install, oroperate thefixture. Contactcustomer servicefor replacement
parts.
www.quoizel.com Care+ Maintenance
LightSource:
Estimated Assembly Time:
Preparation:
Tools Required: None.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
PART NUMBER REPLACEMENT PART
REQ.
NO.
1
2
Wrench
x1
Lock Washer
x1
Hex Nut
x1
Tube
x1
Lock
Screw
x1
Socket
Assembly
x1
Shade
x3
Socket
Collar
x3
Base
x1
10”Dia.
8.75”
93”
15.75”Dia.
Socket
Switch
4”
(3)Medium Base
Decorative
Filament 60W
bulbs (provided),
Maximum 100W.
M12753SH SHADE
I1101EC VINTAGE BULB
3
3
Edison
Bulb
x3
Quick
Connector
1
2