Installation Sheet

Pleasegoto forproductcleaningtips.Gotothe selection.
(1)A21MediumBaseBulb150WMaximum
20-30minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtobesureallpartsare
present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomerserviceforreplacement
parts.
www.quoizel.com Care+Maintenance
LightSource:
Estimated Assembly Time:
Preparation:
ToolsRequired:None.
Warnings and Cautions
1of1
Assembly Instruction Sheet #IS-Q3323T
For Style Q3323T
2017 QuoizelInc.
ReleasedDate:2017-12-05
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Q3323T
NOTE: ALL DIMENSIONS ARE ROUNDED
UP TO THE NEAREST 1/4"
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
Cord
25.5”
A. Place the Tabs on the bottom edge of the Shade Assembly to the
Arms on the Base. Secure the Shade Assembly by threading the
Lock Screws into the Arms and the Tabs. Hand tighten until snug
with screwdrivers.
B. Insert the bulb onto the socket and screw snugly into place.
Your fixture is now assembled and ready to use. Enjoy!
Shade
Assembly
16” Dia.
7”
Bulb (not
included)
Socket
Lock Screw
Arm
Base
Switch
Tab
13.75” Dia.
9” Dia.