Installation Sheet

ManualsBrandsQuoizel ManualsCeiling FixturesQuoizel Wimberly 3 Light 14" Wide Semi-Flush Ceiling Fixture

1of2

Package Contents

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly

recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.

Pleasegoto forproductcleaningtips.Gotothe selection.

(3)A19MediumBaseBulbs100WMaximum,MediumBaseT10Vintage Bulbs are recommended, bulbs not included.

MinimumHangingHeightis16”,MaximumHangingHeightis54”.

30-45minutes

Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtoensureallpartsare

present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactyouroriginalplaceofpurchase.

www.quoizel.com Care+Maintenance

LightSource:

FixtureHangingHeight:

EstimatedAssembly Time:

Preparation:

ToolsRequired:Flatheadscrewdriver,Phillipsscrewdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.

Note:This CONVERTIBLEfixturecanbemountedaspendantlightorsemi-flushlight.Refertorespective

installationsteps forinstallations.

2019 QuoizelInc.

ReleasedDate:2019-04-04

visit us on-line at www.quoizel.com

Crossbar

Assembly

Ceiling Canopy

12” Rod

6” Rod

Allen Screw

Lock Screw

Side Arm

Fixture Body

Shade

For Styles QPP5113PK, QF5113PK, QPP5113WS and QF5113WS

Installation Guide

Assembly Instructions for Pendant Light:

QPP5113PK and QPP5113WS

(Step 1A - Step 7A)

STEP 1A Install Side Arms, Fixture Body and Shade together-

A. Attach the curve end of the Side Arm (F) to the Fixture Body (H) and

secure with the Allen Screw (E). Do not tighten the Allen Screw (E) at

this moment.

B. Place the Fixture Body (H) into the Shade (I) and align the bottom

end of the Side Arm (F) to the mounting hole on the Shade (I). Secure

Side Arms (F) to the Shade (I) by using Lock Screws (G).

C. Hand tighten Lock Screws (G) and Allen Screws (E) until snug.

Figure 1A

STEP 2A Install Ceiling Canopy

and Rods to Fixture Body

A. Tighten the hex nut inside of the

Ceiling Canopy (B) until snug.

B. Determine the Rods (C/D) to be

assembled to the Fixture Body (H)

according to your hanging height.

C. Pass the supply wires and ground

wire through the chosen rods (C/D)

and the Ceiling Canopy (B). Thread

the Fixture Body (H), the chosen

Rods (C/D) and the Ceiling Canopy

Supply

Wires and

Ground Wire

(B) together. Hand tighten

until snug.

Suggested rods for Ceiling

height :

8’ ceiling : use (1) 6” rod

and (1) 12” rod

9’ ceiling : use (1) 6” rod

and (2) 12” rods

10’ ceiling : use (2) 6” rods

and (2) 12” rods

Figure 2A

Hex Nut

Summary of content (2 pages)

PAGE 1
Installation Guide For Styles QPP5113PK, QF5113PK, QPP5113WS and QF5113WS Please go to www.quoizel.com for product cleaning tips. Go to the Care + Maintenance selection. Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses. Light Source: (3) A19 Medium Base Bulbs 100W Maximum, Medium Base T10 Vintage Bulbs are recommended, bulbs not included. Fixture Hanging Height: Minimum Hanging Height is 16”, Maximum Hanging Height is 54”.
PAGE 2
STEP 3A - Installing the Crossbar Assembly STEP 7A - Install Bulbs A. Pass the supply wires from outlet box through the Crossbar Assembly (A). Attach the Crossbar Assembly (A) to the outlet box with the head of the green ground screw facing you. Secure the Crossbar Assembly (A) with outlet box screws (not included). Tighten until snug. A. Insert bulbs onto sockets and screw snugly into place. Your fixture is now assembled and ready to use.