Installation Sheet

ManualsBrandsQuoizel ManualsChandeliersDury 4 Light 21-1/2" Wide Taper Candle Chandelier

2of2

Nipple

Supply

Wires and

Ground Wire

Figure 3

Canopy

Chain Loop

Canopy

Lock Ring

(Step 3 Continued)

E. Go to Step 4 for wire connections

and follow the directions. Return

to Step F in this step when

complete with Step 4.

F. Raise the Ceiling Canopy (DD)

and canopy lock ring up the

Fixture Chain (BB) and over the

canopy chain loop. Tighten the

canopy lock ring onto the canopy

chain loop until tight.

Suggested chain length for

Ceiling height :

8’ ceiling : use 12 links of chain

and 2 quick links

9’ ceiling : use 22 links of chain

and 2 quick links

10’ ceiling : use 32 links of chain

and 2 quick links

NOTE: ALL DIMENSIONS ARE ROUNDED

UP TO THE NEAREST 1/4"

2017 QuoizelInc.

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184

or visit us on-line at www.quoizel.com

ReleasedDate:2018-01-27

RDY2821AWH

FINISH: ANTIQUE WHITE

STEP 5 - Install Bulbs

A. Install bulbs onto sockets and screw snugly into place.

Your fixture is now assembled and ready to use. Enjoy!

Figure 4

STEP 4 - Making the Wire Connections

A. Wrap bare or green ground wire around green ground screw on the

crossbar, no less than 2 inches from the end of the wire. Tighten the

green ground screw.

Use standard wire connectors (not included) to make all wire

connections. Twist connectors until wires are tightly joined together.

Wrap each connection with approved electrical tape and carefully

stuff all the connected wires into outlet box.

Note: If the electrical wire is going to be cut shorter than provided

you will need to identify the "L" line wire and the "N" neutral wire

before you cut the excess wire off. One is labeled N and the other

labeled L. To do this separate the "L" line wire and the "N" neutral

wire as far as you need to. Re-label the wire near where you want to

make the cut. Be sure to mark the wire on the side of the fixture and

not on the excess wire being cut and removed.

Green Ground Screw

on the Crossbar

White wire

from outlet box

White wire from fixture

identified with the Label “N”

Black wire from

outlet box (or Red)

Black wire from fixture

identified with the label “L”

Bare, or Green

Ground wire

from outlet box

Ground wire

from Fixture

Figure 5

Bulb

Socket

68”OVERALL HEIGHT

INCLUDES 48” CHAIN

AND 2 QUICK LINKS

(

)

5.5”Dia.

1”

21.5”Dia.

14.5”