Installation Guide

ManualsBrandsQuoizel ManualsCeiling FixturesQuoizel Spiral 20" Wide Semi-Flush Ceiling Fixture

1 of 5

2020 Quoizel Inc.

visit us on-line at www.quoizel.com

Released Date: 2020-02-21

For Styles SPL1720K and SPL2820K

Installation Guide

Crossbar Assembly

x 1

Package Contents

PARTS BAG

6”L Rod

x 2

12”L Rod

x 2

Preparation: Identify and inspect all parts

before beginning the installation.

Missing or damaged parts? Contact your

original place of purchase.

Light SourceTools Required

3 BULBS REQUIRED

BULBS NOT INCLUDED

Warnings and Cautions

Turn off the electricity at the circuit breaker

before installation. Consult a licensed

electrician if in doubt about installation.

Turn off power to the fixture and allow the

bulbs to cool before replacing.

Fixture Height Adjustable

10.25” to 46.25”

Outlet Box Screw

x 2

Wire Connector

x 3

Ceiling Canopy

Assembly

x 1

Table of

Contents

Diffuser

x 1

BULB BASE TYPE

Medium (E26)

BULB SHAPE

TYPE A

100W

MAX

Fixture Body

x 1

Nipple assembly

x 1

Crossbar

Assembly

Ceiling Canopy

Assembly & Downrod

Wiring

Nipple and Bulb

STEP 2 STEP 3 STEP 4 STEP 6

Ceiling Canopy

STEP 5

Remove

support cage

STEP 1

Diffuser

STEP 7

Summary of content (5 pages)

PAGE 1
Installation Guide For Styles SPL1720K and SPL2820K Tools Required Fixture Height Adjustable 10.25” to 46.25” Light Source 100W MAX Warnings and Cautions Turn off the electricity at the circuit breaker before installation. Consult a licensed electrician if in doubt about installation. BULB BASE TYPE BULB SHAPE Medium (E26) TYPE A Turn off power to the fixture and allow the bulbs to cool before replacing.
PAGE 2
STEP 1 1 2 Cut straps Remove support cage Straps STEP 2 1 2 Step 2 - 3 Test fitting ceiling canopy to mounting screws Step 1 Install crossbar assembly 2020 Quoizel Inc. 3 visit us on-line at www.quoizel.
PAGE 3
STEP 3 OPTION 1 Pendant — SPL2820K 1 2 3 Install rods Tighten hex nut inside of the ceiling canopy Install Ceiling Canopy Optional Rods 8’ ceiling: (2) 12”L rods 9’ ceiling: (2) 6”L + (2) 12”L rods OPTION 2 Semi-flush — SPL1720K 1 2 Optional: Remove swivel Install ceiling canopy OR STEP 4 White wire (neutral) from outlet box White wire from fixture Black wire from fixture Black or Red wire (hot) from outlet box Bare or Green ground wire from outlet box Ground wire from Fixture *Green
PAGE 4
STEP 5 OPTION 1 SPL2820K OPTION 2 SPL1720K STEP 6 1 Remove finial, cap, (1) hex nut and washers from nipple OPTION 1 OPTION 2 SPL2820K Install nipple with hex nuts Install bulb 2 3 2020 Quoizel Inc. visit us on-line at www.quoizel.
PAGE 5
STEP 7 1 2 3 Turn the hex nut upward Install diffuser and finial Tighten hex nut against the diffuser hex nut 2020 Quoizel Inc. OPTION 1 OPTION 2 SPL2820K SPL1720K visit us on-line at www.quoizel.