Installation Guide

Warnings and Cautions
1of1
Assembly Instruction Sheet #IS-TF2600TVA
For Style TF2600TVA
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2015 QuoizelInc.
December2015
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
Care of Tiffany Style Shade
A new tiffany lamp shade has an oil film applied to the shade that protects the tiffany shade from scratches during shipment. If the oil applied is
too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.
For general cleaning of tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.
If a white powder appears on the soldered joints of the tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or
mineral oil applied directly to oxidized areas and the soldered area will return to like new.
TF2600TVA
PART NUMBER
NOTE: ALL DIMENSIONS ARE ROUNDED
UP TO THE NEAREST 1/4"
REPLACEMENT PART
NO.
(3) 100W
Bulbs
(Not Supplied)
Medium
Base
1
2
QTY.
Pleasegoto forproduct cleaningtips. Goto the selection.
(3)A19MediumBase 100WMaximum,Alternatebulb (3)23W CFL
15-20minutes
Identifyand inspectall partsbefore beginninginstallation. Checkpackage contentlist anddiagrams belowto besure allparts are
present.If anyparts aremissing ordamaged, donot attemptto assemble,install, oroperate thefixture. Contactcustomer servicefor replacement
parts.
www.quoizel.com Care+ Maintenance
LightSource:
Estimated Assembly Time:
Preparation:
ToolsRequired: None.
A. Thread the Socket
Assembly onto the Base.
Hand tighten until sung.
B. Thread the Hex Nut end of
Nipple with Hex Nut into
the Hex Coupling on the
top center of the Socket
Assembly. By using pliers,
thread the Hex Nut against
the Hex Coupling and hand
tighten until sung.
C. Place the Spacer Tube and
the Check Ring over the
top end of the Nipple with
Hex Nut. Secure by
threading the Small
Knurled Nut onto the
Nipple. Hand tighten until
sung.
D. Thread the Big Knurled Nut
onto the top end of the
Nipple and adjust it to
proper location for rest
components.
E. Place the Flat Washer and
the Shade over the Nipple.
Secure by threading the
Finial onto the Nipple.
Hand tighten until snug.
F. This fixture uses standard
bulb with medium base .
Maximum 100 watts. Insert
bulb and screw snugly into
place.
Your fixture is now
assembled and ready to
use. Enjoy!
Base
x1
Spacer Tube
x1
Check Ring
x1
Big
Knurled Nut
x1
Small
Knurled Nut
x1
Shade
x1
Finial
x1
Socket
Assembly
x1
Socket
Bulb
G12712SH SHADE
1
12600TVATF
BASE
1
Flat Washer
x1
23.5”Dia.
9.75”
33”
11”Dia.
FINISH: VALIANT BRONZE
2
1
Nipple with
Hex Nut
x1