Installation Sheet

Pleasegoto forproductcleaningtips.Gotothe selection.
20-30minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtobesureallpartsare
present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomerserviceforreplacement
parts.
www.quoizel.com Care+Maintenance
LightSource:
Estimated Assembly Time:
Preparation:
ToolsRequired:None.
(1)C7CandelabraBaseBulb15WMaximum
Warnings and Cautions
1of1
Assembly Instruction Sheet #IS-TF3694VB
For Style TF3694VB
2017 QuoizelInc.
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Care of Tiffany Style Shade
A new tiffany lamp shade has an oil film applied to the shade that protects the tiffany shade from scratches during shipment. If the oil applied is
too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.
For general cleaning of tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.
If a white powder appears on the soldered joints of the tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or
mineral oil applied directly to oxidized areas and the soldered area will return to like new.
C7 Bulb (included)
TF3694VB
NOTE: ALL DIMENSIONS ARE ROUNDED
UP TO THE NEAREST 1/4"
4”
11”
Base
x1
FINISH: VINTAGE BRONZE
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
A. Insert bulbs onto sockets and screw snugly into place.
B. Insert the Socket with C7 Bulb inside of the mounting
hole on the and secure with the Spring Tabs on the
catching the mounting hole on the .
Your fixture is now assembled and ready to use. Enjoy!
Assembly
Base Socket
Assembly Base
Socket
Assembly
x1
ReleasedDate:2018-01-15
7.75”
8.25”