User's Manual

SAMPLE LOADING AND TESTING / SAMPLE TUBE REQUIREMENTS
100
MosaiQ 125 - User Manual - November 2020 - Reference n°: MMSURM.0010.02
8.10 SAMPLE TUBE REQUIREMENTS
Only the sample tube references listed below have been tested for use in the MosaiQ 125.
Sample tubes
1 Greiner, 12ml, ref 160101
2 Greiner, 10ml, ref 136101
3 Greiner, 5ml, ref 115101
4 Greiner, 4ml, ref 109001
5 BD vacutainer, 2 ml, ref 367841
6 BD vacutainer, 4 ml, ref 368860
7 BD vacutainer, 6ml, ref 367864
INFO
For other sample tubes, please contact your local technical representative
to verify the compatibility.
8.11 SAMPLE TESTING MONITORING
This section explains how to carry out and monitor a test run using the graphical user interface. It also
provides information on end-of-run procedures and test results.
8.11.1 OVERVIEW
The diagram below provides an overview of test run operations.
Show the next
open tasks
Show the time required
for all samples to be
pipetted and the time
remaining until all racks
can be removed.
Shows the number of available
tests for disease screening test
(immunohaematology is not
available)
Shows the time required for
all samples to be processed
and for the results to become
available.
Lanes in the sample loading
• With green background: All samples were
pipetted. It is possible to remove the rack.
• With lock and time data: The samples are
currently being pipetted or awaiting to be
pipetted.
• With light grey lane number: Empty lanes.
(overview screen during operation)