User's Manual

SAMPLE LOADING AND TESTING / FILTERING OF TEST RESULTS
109
MosaiQ 125 - User Manual - November 2020 - Reference n°: MMSURM.0010.02
8.16 FILTERING OF TEST RESULTS
This section provides step-by-step instructions on how to filter the test results using different criteria.
-
1
Tap on the Results icon in the navigation bar.
-
2
Tap on the Finished button or another result menu entry.
-
3
Use the Filter function to focus on the most important results.
1
2
3
(filtering test results)
-
4
The following screen appears:
Combination of the conditions :
• All: shows only results that fulfill all conditions.
- : Delete the
condition line
+ : To add a new
condition line below
the current line
Conditions :
• Contains: the desired value is included in
the value of the result (e.g. 456 => 456231,
145684, 985456).
• Equals: The specified value is identical to
the value of the result (e.g. 456231 => only
456231).
Category e.g.
Sample ID, Test Order
Value: desired value
of the condition.
Cancel: to cancel
the filter function.
Apply: to apply the
filter to the results.
4
(filter criteria)