User's Manual

MOSAIQ125 PARTS DESCRIPTION AND LOCATION / WASTE DRAWER
37
MosaiQ 125 - User Manual - November 2020 - Reference n°: MMSURM.0010.02
5.8 WASTE DRAWER
The waste system has two components located in the waste drawer. One area for liquid
waste with two canister and one for solid waste (used microarrays) with one drawer.
(waste drawer localization and opening)
The liquid waste canisters have yellow LEDs to indicate their status:
Liquid waste LED status
LED on
In use
LED off
Not in use
(waste canister LEDs)
Function:
The waste drawer collects the liquid and the solid waste.
Capacity:
Two compartments.
 One compartment with two liquid waste canisters (red caps) with a capacity of 10
liters each, which collect all liquid waste (from MosaiQ system reagents, processed
samples and system liquid) on the left-hand side (provided with your MosaiQ 125).
 One compartment with the solid waste container (to be used with a biological
waste bag with a capacity of 50 liters) which collects all used microarrays on the
right side of the waste drawer. Based on the amount of processed microarrays, the
MosaiQ 125 informs the user when the solid waste container needs to be emptied.
NOTICE
Drawers
The pulled-out drawer can support the weight of waste filled
canisters and no additional weight.
• Do not lean on the drawers.
• Waste drawer supports up to two filled canisters only.
 To remove and load the liquid waste canister, please refer to chapter 7.3.9 and
chapter 7.3.10 and for the solid waste container refer to chapter 8.3.7 and chapter
8.3.8
of this manual.
 To cleaning of waste canister (monthly task), refer to chapter 12.7 of this manual.