User's Manual

MOSAIQ125 PARTS DESCRIPTION AND LOCATION / WATER DRAWER
38
MosaiQ 125 - User Manual - November 2020 - Reference n°: MMSURM.0010.02
5.9 WATER DRAWER
The water drawer is located on the bottom right side of the MosaiQ125 and houses a
maximum of two canisters containing the system liquid required to operate the MosaiQ125.
Users can open and close the water drawer manually. The water drawer can be opened
and closed while the MosaiQ125 is in operation.
(water drawer localization)
Functions:
 To store water canisters (blue caps).
 To access the computer workstation.
NOTICE
Drawers
The pulled-out drawer can support the weight of system liquid
filled canisters and no additional weight
• Do not lean on the drawers,
• Place a maximum of two filled canisters in a drawer.
5.9.1 WATER CANISTERS
There are two canisters with a capacity of 10 L each (provided with your MosaiQ 125). They
shall be filled with purified water (also called system liquid in this manual). Both canisters
are connected to an intermediate container with a 5 L capacity.
NOTICE
Purified water is used in general laboratory applications such
as buffers, pH solutions and microbiological culture media
preparation.
(opened water drawer)
 To remove and load the water canisters, please refer to chapter 7.3.11 of this manual.
 To clean the water canisters (monthly task), please refer to chapter 12.7.5 and
chapter 12.7.6 of this manual.
Functions:
 The water canisters store the system liquid used to prepare the reconstituted wash
buffers.
NOTICE
MosaiQ reconstituted wash buffers.
The reconstituted wash buffers are composed as follow:
• 10% MosaiQ Wash Buffer 1 concentration in system liquid.
• 10% MosaiQ Wash Buffer 2 concentration in system liquid.
Each MosaiQ wash buffer is diluted with system liquid in a dilution
chamber as described in
chapter 5.8.
The level of concentration is monitored by a conductivity sensor.
The conductivity values are displayed each time the reagent
drawer is closed.