User's Manual

MOSAIQ125 PARTS DESCRIPTION AND LOCATION / PROCESS MODULES
41
MosaiQ 125 - User Manual - November 2020 - Reference n°: MMSURM.0010.02
5.11 PROCESS MODULES
The process modules are housed within the MosaiQ125 body on the upper right side of the
MosaiQ125 and include the reagent carriage, wash module, incubator module, camera
module and pipettor module.
To access the process modules compartment, the reagent door must be opened.
The process modules are used at specific steps in the assay procedure, such as washing,
dispensing of reagents and imaging.
 To open the reagent door, lift the door until it is looked.
 Some of the process modules are visible from the opened reagent door.
(reagent door opening)
WARNING
The reagent door can be opened and closed manually only when
the MosaiQ125 is not in operation. Locking and unlocking of the
reagent door is software controlled.
The reagent door light status.
Light is on : reagent door
CANNOT be opened
Light is off : reagent door
CAN be opened
(reagent door light status)
When the reagent door is opened.
(visible process modules with the opened reagent door)