User's Manual

OPERATING INSTRUCTIONS / HOW TO REMOVE AND LOAD EACH RESOURCE
66
E
MosaiQ 125 - User Manual - November 2020 - Reference n°: MMSURM.0010.02
7.3 HOW TO REMOVE AND LOAD EACH RESOURCE
The following section provides step-by-step instructions on how to remove and load each
resource.
7.3.1 REMOVING MAGAZINES
This section provides step-by-step instructions on how to remove magazines from the
magazine station on the MosaiQ 125. The MosaiQ Software controls magazine station
locking and unlocking operations.
1 -
1
Open the magazine station door. and rotate the magazine carousel until the
empty magazine is facing you.
2 - Remove the magazine from the magazine station
භ
2
Pull the upper part of the magazine toward you
භ
3
Lift the magazine until it is detached
2
1
3
(magazine station door opening and magazine removing)
4 - Dispose of the empty magazine.
5 - If necessary, remove another magazine.
You cannot open the magazine station door when the MosaiQ 125 is operating or
performing initialization.
Wait until the light is off to open the magazin station door.
Light is on : magazine station
door CANNOT be opened
Light is off : magazine station
door CAN be opened
(magazine station light status)