User's Manual
OPERATING INSTRUCTIONS / HOW TO REMOVE AND LOAD EACH RESOURCE
82
E
MosaiQ 125 - User Manual - November 2020 - Reference n°: MMSURM.0010.02
3 - Remove the stopper from the canister level sensor hole.
(removing the stopper of the canister level sensor hole)
4 - Plug in the level sensor connector and insert the liquid waste connector into the
canister, until a click is heard.
Click !
(plugging in the liquid waste level sensor)
7.3.11 REMOVING THE WATER CANISTER
This section explains how to remove the water canister from the MosaiQ125. The water
canisters are located in the water drawer. The water drawer can be opened and closed
manually. The users can open and close this compartment when the MosaiQ 125 is in
operation if a canister needs to be replaced or refilled.
To remove the water canister:
-
1
Tap on the Resources icon in the navigation bar.
-
2
Tap on the System Liquid area to check the percentage of remaining volume in each
canister.
2
1
(system liquid resources area)