Installation Guide

4. Safety Information
Observe the following safety guidelines when installing the device:
Only a qualified service technician should install or service the device using the approved original
Quuppa parts supplied in the sales package. Faulty installation or service may be dangerous and
may void any warranty which may apply to the device.
End users should remember that the device contains complex technical equipment and requires
installation using special tools and expert know-how.
Instructions given in this guide are general guidelines that apply to the installation of Quuppa
devices. However, due to the wide variety of environments and mounting surfaces, this guide
cannot consider the individual technical requirements relevant for any particular installation.
Consult Quuppa in case you are uncertain about installation in a specific environment.
The device is designed to operate either by using a standard Power over Ethernet (PoE)
compatible network component connected at the Ethernet socket or by Micro USB.
For your safety, and to prevent any damage to the device, only use a compatible power supply.
Contact Quuppa in case of any uncertainty regarding compatible power supplies. When using a
PoE compatible network component as a power source, only use standard certified network
components.
The device has built-in protection for overvoltage but a connection using the wrong polarity might
damage the unit.
When installing the devices, make sure that the installation surface can safely carry the weight of
the equipment.
Your service technician or dealer may be able to provide you with information on alternative
mounting solutions for different types of environments.
Do not smoke when installing the equipment. Make sure there is no source of fire or flame
nearby.
Make sure to place cables so that they will not be subject to mechanical wear and tear.
6/21
Quuppa Q35 Locator Installation Guide and Safety Information
Quuppa Oy, Keilaranta 1, 02150 Espoo, Finland
© 2020 Quuppa Oy
Customer Confidential