REVERSIBLE l-IN-4-OUT 4-IN-l-OUT PARALLEL AUTO SWITCH AS-154P User’s Manual Packing Checklist l l l Reversible Auto Switch, AS-154P User’s Manual, AS-154P 3.5” Floppy X l X l xl wm-m@,“hv- mm-” 0 Copyright 1997 ATENO International Co., Ltd Manual Part No PAPE-- 1042.
Introduction AS154P Introduction AS-154P reversible auto switch allows either 4-IN-l-OUT or l-IN-4-OUT configuration. It helps to solve the problem between multiple users and multiple peripherals with the minimum cost. This unit has ATEN’s latest ASIC technology which is both reliable and power free. FEATURES: Reversible. Non-Powered. Compact size. Transparent to user. Easy to install. Win 3.1/95/NT, DOS Resident software include. Built-in powerful ASK. FCC class B certificated.
AS-154P Installation Installation (For 4-To-l Mode) l l l l l Select desired operation by DIP switch and slide switch. Turn off all PCs and printer. To connect PCs to AS- 154P use DB-25 male-to-male cables. To connect AS-154P to printer, use 25pin-to-36-pin male-to-male cable. Turn on all PCs and printer and AS-154P is ready. * Scanning LED indicating AS-154P is in Auto Link mode. * Non-scanning LED indicating AS154P is in Manual mode or prints data in Auto mode. Fig.
1 Installation AS-154P Installation (For l-To-4 Mode) Select desired operation by DIP switch (SWl, SW2 is on) and slide switch. Turn off all printers and PC. To connect PC to AS-154P use DB-25 male-to-male cable. To connect AS-154P to printers, use 25pin-to-36-pin male-to-male cables. Turn on all printers and PC, and AS-154P is ready. (1 TO Fig.
Specifications AS-154P Specifications ~ Potrrblc storage series *“yu’~~~~~~~~_.~%,, ‘, >w . ,, ..^, .,,, +%Tmlc@ m&mJnm~ty~ ~~-- The mwt easilywy to cxprtnd your PC system via par;aNol pott and II0 LPT poft is occupied. Include; fur 2.5”, 3.f” we Hard Dtsk and for 5 114” size CD-ROM models. Video spbtter scncs The simplest solution for image duphcatmn. cascade abdny allows mfimte numbers of VGA momton dqlay the same mmpe Include : 1 to 16 Rack mount IU model. 1 to 2/4/X desktop models.
PREVENTING RADIO & TV INTERFERENCE WARNING!!! This equipment has been tested and found to comply with limits for a Class 6 digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.