Children’s Digital Camcorder FILM & SEE User Manual QW DV-300PK Please read these instructions before using the product and save them for future reference. The illustrations are for reference only and are subject to change without notice.
Contents I. INTRODUCTION.................................................................................................................................3 II. SAFETY INSTRUCTIONS.................................................................................................................3 III. IMPORTANT SAFETY PRECAUTIONS...................................................................................... 4 IV. CONTENTS.....................................................................................
I. INTRODUCTION Thank you for the purchase of the Film & See children’s digital camcorder. This manual contains important safety and operating information. Please read all the information carefully before you use the device to avoid accidents and keep it for future reference. Follow these important safety and operation instructions. II.
III. IMPORTANT SAFETY PRECAUTIONS • In order to prevent program failure, never disconnect the product suddenly from a PC while file transferring is in progress. • Disconnect the appliance from THE PC and remove the battery before cleaning. Use a dry soft cloth to clean this appliance. Do not dismantle the product or use alcohol, thinners or benzene to clean the surface of the product. • The supplier or retailer accepts no liability for lost, corrupted or damaged data.
V. PRODUCT SPECIFICATIONS 1.3MP Mega Pixels CMOS Sensor Still Image Resolution: (3MP (2048x1536) / 1.3MP (1280x960) / VGA (640x480) Video Clip Resolution: D1 720 x 480 @ 30 fps File Formats: JPEG / AVI / WAV Supports SD/MMC /SDHC Memory Slot up to 32GB 4 x Digital Zoom 1.44” TFT Display Screen Mini USB 5 Pin PC Interface Built in Microphone / Speaker � � � � � � � � � Works with Microsoft Windows XP, Vista, Windows 7 Power Source: 3 x AAA Batteries Storage/Operation Temperature: 5°C to 40°C � � � VI.
B. Installing the Battery 1. Open the camera battery door by pushing the clip to release the cover. 2. Insert 3 x AAA batteries as shown, ensuring the +/- symbols on the batteries are matching +/- symbols on the camera. 3. Close the battery cover. C. Installing the SD card The camera has no internal memory; to be able to record more images and video clips you will need to insert a memory card. The camera accepts SD and MMC memory cards up to 32GB.
E. Camera Modes The camera has 4 different types of modes Capture mode, Video mode, Audio record mode and Playback mode. Press the Mode button to select between all the modes. Display Title Description Capture mode For taking still photos Video mode For recording movie clips Audio mode For recording audio files Playback mode For viewing saved files 1. Capture Mode a) Taking a photo The Digital Video Camera allows you to take digital still photos. To take digital still photos: 1.
b) Using SELF TIMER/BURST function You can use the self-timer function when you wish to take a photograph of yourself or when you wish to photograph an object where the camera must be as still as possible. The burst function will allow you take continuous photos. 1. Turn the power on, and set the camcorder to the Capture mode. 2. Press the “Left” button to change the self-timer Mode: each time the button is pushed left, the icon on screen is changed.
Photo settings are as follows: Menu Function Resolu tion Allows you to change the image resolution for taking still photos. There are five options for choice: [3M] 2048x1536 by interpolation / [1.3M] 1280x960 / [VGA] 640x480. Quality Selecting lower image quality decreases the image size and allows you to capture more images. There are three options for choice Super Fine, Fine, Normal. Meteri ng Allows you to change the brightness of the picture.
2. Video Mode a) Making a video clip The Digital Camcorder allows you to create video clips. To make a video clip: 1. Press the Mode button to set the camera to video mode, the screen. The screen will look like below: icon appears on the LCD 2. Use the LCD screen to view your subject. 3. Use the “Zoom In and Zoom Out” buttons to zoom in and out on your subject. The value of magnification level appears on the screen. 4. Press the Shutter button to start recording.
Video settings are as follows: Menu Function Movie Size Allows you to change the video resolution for for the recording. You can choose from D1 720 x 480, VGA 640 x 480 and QVGA 320 x 240. Frame Rate Frame rate allows you to set how many frames per second are recorded. There are 2 choices Middle and Low. Middle records at 30fps, low records at 15fps. The higher frame rate gives better quality recording but also takes up extra memory. Metering Allows you to change the brightness of the picture.
and press it again to resume recording. •Press the Shutter button again to stop recording or recording stops when the current SD/MMC card is full. 1. Playback mode a) Viewing saved files Playback mode allows you to view all your saved files. To access the playback menu: 1. Press the Playback button to set the camera to playback mode, the LCD screen. The screen will look like below: icon appears on the The Screen will now display the files that have been saved.
Playback Settings are as follows: Menu Function Lock Allows you to Lock and Unlock images from being deleted. There are 3 options Lock/Unlock One, Lock All, Unlock All. The icon will appear on each file that is locked when viewing them in the playback mode Delete Slide Show Allows you to delete one or all files. This option allows you to play a slide show of the digital still photos, Choose the Interval time from 1-10secs, Press the OK button on Start and the slide show will start to play.
confirm the setting options. The screen will return back to the setting menu. Camera Settings are as follows: Menu Function Sounds There are four different sound options, each option will play the sound when you change the setting: Shutter: Allows you to set the shutter sound On or Off by pressing the Right button. Start Up: Allows you to set the start-up sound. Press the Right button to change the sound. There are four options None, 1, 2, 3.
G. AV Output The video output signal can be switched (NTSC or PAL) to accommodate different signal systems. For example: NTSC for USA, Canada, Taiwan, Japan, etc. and PAL for Europe, Asia (excluding Taiwan), Australia, New Zealand etc. The Setting can be changed in the camera setting menu. Plug in the AV cable (supplied) to the camera Video output jack the LCD screen turns black, connect the camera to a TV and the TV screen now performs as the camera LCD screen. 1.
4. Click “Install MAGIX Photo Manager 10” - Installs software for editing pictures. Click the items in the autorun menu to install the software. Follow the on-screen instructions to complete installation. Notes: 1.Open MAGIX Video easy SE or MAGIX Photo Manager 10, you have to register the software at first, then use program without any time limit. 2. Don’t forget to install the QuickTime Player during installing the MAGIX video easy SE. 3.
The contents of this manual may change with no prior notice in order to give you a better support. We reserve the right to make changes to this manual without notice. You can help protect the environment. Please remember to comply the local regulations: arrange to dispose non-working electrical equipment to an appropriate waste disposal center.