Overview of Primary Product

ManualsBrandsQwik Products ManualsHVAC SuppliesLine Set Flush Tool

QT1100

2lb Can

QT1130

1lb Can

QT1150

Starter Kit

Air Conditioning

& Refrigeration

System Flush

QT1100, QT1130, & QT1150

*For any product evaluations, and independent test results proving product eectiveness,

visit

www.qwik.com/test-results/ush/

Mainstream Engineering Corporation

1-800-866-3550

www.qwik.com

MKTG000045_REV-B / 100010802-B

QwikNozzle™ is a trademark, and QwikCheck®, QwikInjector®, QwikShot®, Qwik System Flush® and Qwik-SF® are registered trademarks of

Mainstream Engineering Corporation, Rockledge, FL. 32955, (321) 631-3550 U.S. Patent Pending. All QwikProducts™ are made in the USA

The original Qwik System Flush® was developed by

Mainstream Engineering Corporation for the U.S. Air Force

in 2001. EPA regulations brought about the need to nd

alternatives for the R-11 & R-113 ushing agents originally

used to clean the pilot’s oxygen breathing systems. Qwik-SF®

was developed as a superior, non-toxic ushing agent with no

long-term environmental or health risks.

This same technology has been utilized to provide a ushing

agent for today’s HVAC systems that is still easy to use, ozone

safe, non-toxic and non-ammable. Qwik System Flush®

eectively removes impurities, including oil, sludge, acid and

moisture. Qwik-SF® is a must for system clean ups, retrots

and system burnouts.

System Flush

FORMULATED FOR FIGHTER JETS

MODIFIED FOR HVAC SYSTEMS

FORMULATED FOR FIGHTER JETS - MODIFIED FOR HVAC SYSTEMS

System Flush

Qwik System Flush

Qwik

System Flush

Competition

Acid Absorbed (mg/L)

1800

1600

1400

1200

1000

800

600

400

200

Acid

Removal*

more eective

Qwik

System Flush

Competition

Water Absorbed (ppm)

1,000

2,000

3,000

7,000

8,000

6,000

4,000

5,000

Moisture

Absorption*

more eective

Qwik

System Flush

Competition

Acid Absorbed (mg/L)

1800

1600

1400

1200

1000

800

600

400

200

Acid

Removal*

more eective

Qwik

System Flush

Competition

Water Absorbed (ppm)

1,000

2,000

3,000

7,000

8,000

6,000

4,000

5,000

Moisture

Absorption*

more eective

XX SUPERIOR

FORMULATION

XX NON-TOXIC

XX NON-FLAMMABLE

XX OZONE SAFE

XX AEROSOL

XX LEAVES NO

RESIDUE

XX PATENT

PENDING

MADE IN THE U.S.A.

See how Qwik System Flush® compares to the competition!

Summary of content (2 pages)

PAGE 1
Qwik System Flush® QT1150 Starter Kit QT1100 2lb Can TM System Flush® FORMULATED FOR FIGHTER JETS MODIFIED FOR HVAC SYSTEMS Air Conditioning & Refrigeration System Flush QT1100, QT1130, & QT1150 The original Qwik System Flush® was developed by Mainstream Engineering Corporation for the U.S. Air Force in 2001. EPA regulations brought about the need to find alternatives for the R-11 & R-113 flushing agents originally usedSystem to clean the pilot’s oxygen® breathing systems.
PAGE 2
Qwik System Flush® Equipment Requirements to flush an Air Conditioning or Refrigeration System using Qwik System Flush® Aerosol. The following equipment will be required for each flushing operation: Qwik-SF® Starter Kit P/N QT1150 Qwik-SF® 2lb. P/N QT1100 1. Qwik System Flush®. As a general rule, one two pound aerosol canister will clean up to a 10-ton system. The amount needed will vary by size and level of contamination. See the chart below to estimate what you’ll need to complete your task.