User's Manual

Chapter 4
22
Qwizdom Actionpoint 2007
·
The timer has pause/play, stop, and add/subtract 5 seconds options.
·
You can move the timer by clicking on it and dragging it to another area of the
screen.
·
Remotes will not be able to answer when time is up.
You can set the timer two ways; use the time from each slide or apply a new time to the
presentation. When you create a slide, you enter the amount of time you want the slide to
display for.
To set a new time to the presentation:
1.
Click on the
Timer
drop-down list and select "
Use Global Timer Value of
..."
2.
Enter the number of seconds.
3.
Click on
OK
to present the presentation with the newly set time.
Points
You can set the point value two ways; use the point value from each slide or apply a new
point value to all the questions in the presentation. When you create a slide, you enter the
number of points the correct response will be awarded. Go to
Creating a Slide
for more
information.
To apply a new point value to all the questions in the presentation:
1.
Check the "
Override Point Value with Global Point value of xxx points"
option.
2.
Enter the number of points.
3.
Click on
OK
to present the presentation with the newly set time.
Right/Wrong Feedback
This allows participants to see if their response is right or wrong.
1.
Check the "
Send Right/Wrong Feedback to Remotes after answering"
box in the
General
tab of the
Presentation Setup
window.
Feedback will appear on the LCD screen of the participant's remote during presentation. A
check mark
will indicate a correct response, an
X
will indicate an incorrect response. If the
feedback is disabled, a
check mark
and
X
will appear on the LCD screen indicating that a
response was received.
6.1.3 Using Remotes in Presentation
Instructor Remote Tips
·
The Q5 RF instructor remote will say "
Ready
" or "
Last Key
.
·
Since the Q5 RF remote is not applicable during answer keys, the LCD screen will
display "
Access Denied
."
·
Press the / key on the RF instructor remote to display the response graph.
·
Press the / key on the RF instructor remote to close the response graph.