User's Manual

Qwizdom Actionpoint User Guide5
Qwizdom Actionpoint 2007
media
" and "
Include this location in search
" boxes.
11.
Click on the
Browse
button, click on
My Computer
, click on the drive that
Qwizdom
Actionpoint
is in, and then find the folder that says
USB_Drivers
. (Do not open the
folder).
12.
Click
OK
and then
Next.
A prompt will appear that says the drivers have not passed
the
Microsoft Windows Update
testing, click on
Continue Anyway
and then
Finish
.
13.
Repeat the above steps once more and then restart your computer.
Installing USB Drivers on Windows 98
You will need to do this procedure twice (
because there are two drivers
).
1.
Insert the
Qwizdom Actionpoint
disc into the computer and make sure the host is
plugged in properly.
2.
From the
Start
menu, go to
Settings
.
3.
Go to the
Control Panel
and double-click on the
System
icon.
4.
Click on the
Device Manager
tab.
5.
Select the option
View Devices by Type
.
6.
Qwizdom RF Host or Qwizdom USB Base
should be located under
Universal Serial Bus
Controllers
,
Ports
and
Unknown
or
Other Devices
.
7.
When you find it, select the file and then click on the
Properties
button on the
bottom.
8.
Click on the
Driver
tab and click on the button that says
Update Driver
. The
installation wizard will appear.
9.
Click
Next
and select "
search for a better driver than the one your device is using now
."
10.
Click
Next
.
11.
Check the
CD-ROM drive
and
Specify Location
.
12.
Click on the
Browse
button. Go to the drive the
Qwizdom Actionpoint
disc is in and
then select the
USB_Drivers
.
13.
Click
OK
and then
Next.
A prompt will appear that says the drivers have not passed
the
Microsoft Windows Update
testing.
14.
Click on
Continue Anyway
and then
Finish
.
15.
Repeat the above steps once more and then restart your computer.
3 Chapter 1
3.1 Actionpoint Overview
From right to left:
Present
(
Actionpoint icon
) button -presentation setup
Insert
Slide
-create a new slide
Question
-displays slide type
Type
-number of choices (applicable depending on question type)