User's Manual

17
2‐2‐1UseEthernetcabletoconnectswitchtoIPcameras
2‐2‐2UseEthernetcabletoconnectswitchtoCPE54501#
2‐2‐3UseEthernetcabletoconnectLANportofCPE54502#toPOEportofpoweradapter
2‐2‐4UseEthernetcabletoconnect
WANportofCPE54502#toNVR/DVR
2‐2‐5Turnonallequipment,waitfor1minute,thenyoucouldseevideoofcameraonmonitor




2‐3Withyourrouter,toextendWi‐Fisignal,CPE5450kitareusedasWi‐Firepeater
2‐3‐1Pleasekindlyrefertostep1‐2‐1(from1‐2‐1‐1to1‐2‐1‐7)
2‐2‐2Thedefaultpasswordforthedeviceis:66666666
2‐2‐3IPaddressforanotherCPE,M(Master)CPE5450is:192.168.188.252,
andIPaddressforS(Slave)
CPE5450is:192.168.188.253,soyoucouldlogintothedeviceviapagetochange
SSIDandpasswordofthedevice.



