User's Manual

MENU QUICK REVIEW | 15
9. [Enter Menu]+[9]: BEEP
Turns key beeps OFF or ON.
10. [Enter Menu]+[1]+[0]: R-DCS
DCS receive/squelch settings. Options include
the D023N-D754N positive sequence and the
D023I-D754I reversed sequence.
11. [Enter Menu]+[1]+[1]: R-CTCS
CTCSS receive/squelch settings. Selectable
from 67.0HZ-254.1HZ. you can use the key-
pad to quickly enter in the desired setting.
12. [Enter Menu]+[1]+[2]: T-DCS
DCS transmit settings. Options include the
D023N-D754N positive sequence and the
D023I- D754I reversed sequence.
13. [Enter Menu]+[1]+[3]: T-CTCS
CTCSS transmit settings. Selectable from
67.0Hz-254.1Hz. you can use the keypad to
quickly enter in the desired setting.
14. [Enter Menu]+[1]+[4]: DTMFST
DTMF transmit tone settings.
• OFF : No tones heard through the speaker
when transmitting.
• KEY : Only manually keyed DTMF codes
are heard.
• ANI : Only automatically keyed DTMF
codes are heard.
• BOTH : All DTMF codes are heard.
15. [Enter Menu]+[1]+[5]: BCL
Busy channel lock-out. If you have this turned
on the transmitter will not transmit if a channel
is receiving at the time.
16. [Enter Menu]+[1]+[6]: SC-ADD
Scan settings.
• OFF: This removes the channel from the
scan list.
• ON: This adds the channel to scanning list.
17. [Enter Menu]+[1]+[7]: SC-REV
Scanning settings.
• TO : Time out scan, after the stopping on
an active signal, scanning will resume
after a few seconds.
• CO : Scanning will stop on a carrier channel
and will resume after the carrier chan-
nel stops receiving.
• SE : Scanning will stop once an active carri-
er channel is found.