User's Manual

OTHER SETTINGS | 29

Toggle from High to Low Power
A quick press of the Microphone [#/LOCK] will
alternate power levels from High power to Low
power.

Storing an FM Radio Station and
Scanning
Use PC software to store FM radio channels
names, you can name the FM channel and in-
stead of display the frequency your FM station will
display the name. (software FM option (FM chan-
nels are not stored, only the channel names are))
Press the microphone [✱/SCAN] Key to scan the
FM radio.

Keypad Lock-out
Hold the microphone [#/LOCK] for 2 seconds at
standby to turn on/off the keypad lock-out function.
(The Lock icon appears, when the radio is locked
out)

PTT ID Setting
1. Use PC software to change PTT-ID code.
2. Set the Menu 18 settings on the radio to se-
lect the PTTID signal mode (2Tone, 5Tone, or
DTMF).
3. Set the Menu 20 settings to select when the
PTTID is transmitted.
4. Set the Menu 21 settings to program the PT-
TID transmit delay time.
5. When all the settings are set, when you trans-
mit (Press the PTT) The radio will transmit the
PTTID.

DTMF RX Settings
This radio has DTMF coding and decoding. Use
the PC software to set the DTMF signal settings
first.

DTMF TX Settings
In two-way radio systems, DTMF is most com-
monly used for automation systems and remote
OTHER SETTINGS