Operating Instructions

15
HAND PULSE:
Please hold on the pulse sensor on handle bar and hold on about 3 seconds, the display will show
heart rate value.This value is intended as a guide, can not used as medical data.
HOW TO TRANSFER BETWEEN KPH TO MPH
Under standby mode, insert safety key, press SPEED + and INCLINE+ buttons together and hold on
about 5 seconds until you hear one sound, and then you can finish the transfer between kph and mph.
LUBRICATION REMIND FUNCTION
This machine has lubrication remind function. After every total running distance of 300km (188miles),
your treadmill needs to be maintained with oil. The system will remind with sound for every 10 seconds,
and window will show “OIL”. This means that your treadmill needs to be lubricated with oil. Please read
the user’s manual first, and add the oil to the middle part of running board. After you finishing
lubrication, please hold on “STOP” button for 3 seconds, and the system warning sound will disappear.
SAFETY LOCK FUNCTION:
Under any mode, if you pull away the safety key, the machine will stop.The machine cannot work until
safety key is inserted back.
POWER SAVE FUNCTION:
The machine is with energy saving function. Under standby mode, at the state of waiting for operation,
if without any operation, the saving on power function will be available after 10 minutes, the display will
be closed up. You can press any button to turn on the display.
POWER ON （ ）AND POWER OFF（ ）
Switch off the power: You can switch off the power to stop the treadmill, which won’t be damaged at
any time.
CAUTION:
1. We recommend that you maintain a slow speed at the beginning of a session and hold on to the
handrails until you become comfortable and familiar with the treadmill.
2. Attach the magnet end of the safety pulling rope to the computer and also attach the clip of the
safety pulling rope to your clothing.
3. To end your workout safely, press the STOP button or pull out the safety pulling rope, then the
treadmill will stop immediately.