FR30 Floatride Treadmill Operating Instructions Manual Special tips: 1. 2. 3. Before installation and operation, please read this operation manual carefully. Please save this manual for future reference. Product may vary slightly from the item pictures due to model upgrades.
IMPORTANT SAFETY INSTRUCTIONS WARNING - Read all instructions before using this treadmill. It is important your treadmill receives regular maintenance to prolong its useful life. Failing to regularly maintain your treadmill may void your warranty. Danger–To reduce the risk of electric shock disconnect your treadmill from the electrical outlet prior to cleaning and/or service work.
IMPORTANT ELECTRICAL INFORMATION WARNING! 1) NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power cord away from any moving part of the treadmill including the elevation mechanism and transport wheels. 2) NEVER operate treadmill on Generator or UPS power supply. 3) NEVER remove any cover without first disconnecting AC power. 4) NEVER expose this treadmill to rain or moisture.
minutes. Warning: Now here we suggest that you should consult with your physician or health professional before starting your workout, especially for the age up to 35 old or once-health problem people. We take no responsible for any troubles or hurts if you don’t following our specification. Treadmill will be carefully assembled and covered the motor shield, then connect to the power.
Déclaration d’IC sur l’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux radiations définies par le Canada pour des environnements non contrôlés. Cet équipement doit être installé et utilisé à une distance minimum de 20 cm entre l’antenne et votre corps.
Parts List: NO. DES. A Main frame Specification Nos. NO. DES. Specification Nos.
STEP 2 6
STEP 3 7
STEP 4 8
STEP 5 9
STEP 6 10
FOLDING INSTRUCTION 11
IMPORTANT ELECTRICAL INFORMATION WARNING: This treadmill requires a right power source in order to properly operate. For your safety, as well as the safety of others, please verify that the power source is correct before plugging the equipment. Any incorrect power source could cause significant damage to the equipment and or user. GROUNDING METHODS: This product must be grounded. Grounding provides the least resistance for electrical current and will reduce the risk of electric shock.
OPERATION GUIDE BUTTON FUNCTIONS: 1. INSTANT INCLINE: Press 0-6-15 to choose incline quickly. 2. INCLINE+/INCLINE-: Press + button to increase the incline, press - button to decrease the incline. 3. PROGRAM: Press this button to choose 24 programs, 3 users, 3 HRC and body fat. 4. STOP/PAUSE: Press this button to either pause or stop the machine. 5. FAN: Press this button to turn on/off the fan. 6. START: Press this button at any time to start the machine. 7.
COMPUTER FUNCTIONS: 1.QUICK START: Press START, the system will count down for 3 seconds, and start moving. 2.PAUSE/STOP: Press this button to either pause or stop the machine.Take out the safety key to stop the working of the treadmill, or press STOP two times. 3.Press SPEED+/- to adjust the speed of the machine. 4.Press INCLINE+/- to adjust the incline of the machine. 5.MODE: Press MODE to enter countdown for TIME, DISTANCE, CALORIES. - Press SPEED+/- or INCLINE+/- to set the workout target value.
7.Incline/Calories window: Show current incline value and show calories have burned. Will transfer display every 5 seconds. 8.Time window:Show the running time. 9.Distance window: Show the running distance. 10.Pulse/Speed window: Show current pulse and speed, will transfer display every 5 seconds. HAND PULSE: Please hold on the pulse sensor on handle bar and hold on about 3 seconds, the display will show heart rate value.This value is intended as a guide, can not used as medical data.
MAINTENANCE & CARE General cleaning will help prolong the life and performance of your treadmill. Keep the unit clean and maintained by dusting the components on a regular basis. Clean both sides of the running belt to prevent dust from accumulating underneath the belt. Keep your running shoes clean so that dirt from your shoes does not wear out the running board and belt. Clean the surface of the running belt with a clean damp cloth.
LUBRICATING THE TREADMILL IMPORTANT NOTE: You will need to lubricate your treadmill before the first use. RUNNING BELTS & TREADMILL LUBRICANT: Lubricating the running board and running belt is essential as the friction between the two affects the life span and function of the treadmill, therefore it is suggested that the running board and belt be inspected regularly. WARNING: Always unplug the treadmill from the electrical outlet before cleaning, lubricating or repairing the unit. HOW TO LUBRICATE: 1.
EXPLODED DRAWING 18
19
PARTS LIST NO. Part description A01 Qty NO.
D04 Bolt M10*70 2 E07 Power socket 1 D05 Bolt M10*50 2 E08 Square switch button 1 D06 Bolt M10*40 15 1 E09 Overload protector 1 D07 Bolt M8*15 12 E10 Magnet ring 1 D08 Bolt M8*75 20 8 E11 Magnet core 1 D09 Bolt M8*45 20 6 E12 Running board 1 D10 Bolt M8*15 8 E13 Incline motor 1 D11 Bolt M8*65 2 E14 DC motor 1 D12 Bolt M6*55 1 E15 PCB board 1 D13 Bolt M6*12 2 E16 Control board 1 D14 Bolt M6*25 8 E17 Panel top signal wire 1 D15 Bolt
H01 Belt hook H02 Screw J01 Bluetooh main board Bluetooh transfer module DONGLE J02 J03 2 ST4.
TROUBLESHOOTING 23
PROBLEM POSSIBLE CAUSE SUGGESTED ACTION Not plugged in Plug cord into outlet Safety Key not inserted Insert Safety Key Running belt tension not correct on the left or right sides of the running board Tighten the adjustment bolts on the left and right side of the rear roller Wires from the computer and bottom control board not properly connected. Check wire connections from the computer to the control board. Transformer is damaged If the transformer is damaged, contact customer service.
The incoming voltage is too low or too high. The control board is damaged. E05: Current overload protection (Self Protecting System) A moving part of the treadmill is stuck and therefore the motor is unable to rotate properly. Restart the treadmill. Check the incoming voltage to ensure it’s correct. Inspect moving parts of the treadmill to ensure that they are operating correctly. Check the motor, listen for strange noise and check for a burning smell. Replace the motor if necessary.
