User's Manual

General Information
Page 10 of 27 Mass Notification Pendant Reference Guide
0510-0543-A
The Mass Notify Pendant has 3 buttons:
 The primary button on the top activates
an alarm within the Help Alert software.

The two side buttons will activate a
secondary alarm. The secondary
alarm is activated by simultaneously
pressing and holding both side buttons
for ~2 seconds. Once activated, the
Pendant will vibrate to let the user
know the alarm has been sent.
NOTE: If Mass Notification is enabled and
turned on in the software, the Mass
Notification event will occur when both
buttons are pressed.
If Mass Notification is not turned on in the
software, then the secondary button
activation will trigger a Priority Alert.
RADIO FREQUENCY: The radio
frequency (RF) characteristics of certain
building materials may interfere or block
the Pendant’s signal.