User's Manual

General Information
Mass Notification Pendant Reference Guide Page 11 of 27
0510-0543-A
LED Light
Guidelines
The LED on the Pendant is a status
indicator of the Pendant. The meanings are
in the following table:
Listed below is the pendant LED activity
reference table:
• Blink
- Solid
P
Button Press
LED Sequence (over
10-15 sec)
Meaning How to Respond
• •
Blinking Normal
operation
Battery status is good
No action required
• •
Blinking Normal
operation
Battery status is low
Change batteries
immediately
•• ••
Cannot connect to
AP
Battery status is good
Move to area within
range of network and
wait < 5 min for
blinking pattern to
change
---------------------------------
Solid Orange –
Brown Out State, the
battery made
momentary contact
with the terminal and
did not power up
properly
Cycle the batteries
P------ • --------------- • -----
Alarm is being
triggered
The sequence was
started by user
holding top button for
> 1 second
P---- • ------------------ • -----
MassNote Alarm is
being triggered
The sequence was
started by user
holding both side
buttons for > 2
second