User's Manual

Testing and Care
Mass Notification Pendant Reference Guide Page 21 of 27
0510-0543-A
TESTING AND CARE
Pendant
Testing
Prior to use, verify the pendant is ready
to use by checking the LED indicator.
The status LED should be blinking
green. This indicates that the Pendant is
within range of the WiFi network and will
alarm in the software if the button is
pressed.
Periodic
Testing
1. Make sure before testing your
Pendant that you have followed all
the protocols in place by your facility
to indicate you are performing a
test.
2. In the Help Alert software, flag the
next alarm for your Pendant (via
MAC ID) as a Test. To do this you
need Administrator credentials.
3. Push and hold the button on the
pendant you are trying to test.
4. When the alert is seen in the
software, follow the protocol in
place to acknowledge and clear the
alarm.
5. Your facility must keep the records
for test and pendant inspection.
Visual
Inspection
1. Visually inspect the device for
damage or loose parts.