User's Manual

Testing and Care
Page 22 of 27 Mass Notification Pendant Reference Guide
0510-0543-A
Operation
1. The main button acts as the primary
alert trigger. When the button is
held for the amount of time
configured in the software (default 1
second), the Pendant will enter into
an alarm state and send the alarm
information to the Help Alert server.
2. The Pendants location will update in
the software every 10 seconds and
no other action is required from the
Pendant user. Acknowledging and
Clearing alarms happens in the
software.
3. The two side buttons act as the
Mass Notification trigger. When
both side buttons are held down
simultaneously for the appropriate
amount of time (~2 seconds), the
Pendant will vibrate and the LED
will turn blue to let the user know
that a Mass Notification alert has
been sent to the server.
4. The Pendants location will update in
the software every 10 seconds and
no other action is required from the
Pendant user. Acknowledging and
Clearing alarms happens in the
software.
Storage
Store unused Pendants in an area that
has adequate WiFi coverage to prolong
battery life.
Avoid storing Pendants in metal
drawers or lockers as this will drain the
batteries quicker.