User's Manual

Series 5.0 Software (0510-1059-A_DRAFT) - User Guide 47
Common Operations
Enter Transmitter Information
The Transmitter tab allows you to enter Pendant and Fall Management transmitter information of the patient
being admitted.
To enter transmitter information of the patient being admitted:
1. Click Tra n s m i t t e r s on the toolbar.
2. Enter the patient’s transmitter number in the Enter TX ID: box.
3. Click Add.
4. From the Transmitter Assigned box, select the device type.
5. The Supervised option is selected by default. If desired, deselect. it.
6. If you want to enable the Inactivity Check-In feature for the transmitters, select the check box.
7. Enter the Begin and the End times. for the Inactivity Check-In.
8. Click Save.
Asset Admit Information Window
From the Asset Admit Information window you can enter the general information about the asset being
admitted.
FIGURE 3.8: Asset Admit Information Window
There are three tabs for entering admit information: Main, Contact Info, and Picture. The following pages
provide details on each tab in the Admit Information window.
NOTE: The following characters are invalid and should not be used when entering
transmitter information: & `, “+ '