User's Manual

Series 5.0 Software (0510-1059-A_DRAFT) - User Guide 57
Common Operations
3. Use the arrow buttons to find and select the patient or asset to be transferred.
4. Use the arrow buttons to find and select the Destination, or the location to which the patient or asset is
to be transferred.
5. Use the Increase or Decrease arrows to select the amount of time required for the transfer.
6. Click Tra n s f e r .
7. A dialog box appears showing the patient’s or asset’s name, the amount of time allowed to transfer the
patient or asset, and the destination.
FIGURE 3.19: Transfer Started Dialog Box
If the Transfer is for a Wander Management transmitter, 9600 QR transmitter or Fall Management
device, the transfer occurs immediately.
8. Click OK.
As soon as the patient's or asset’s transmitter passes through a protected zone that belongs to the selected
designation, the system recognizes that the transfer was successful and the Transfer completes.
To extend a transfer
1. Click Tra n s f e r on the toolbar.
2. If necessary, swipe your identification card or enter your Login and Password.Press Enter or click OK.
The Tr a n s f e r window appears (Figure 3.18 on page 56). Patients, assets or transmitters that currently
exist in the census are listed in the window.
3. Use the arrow buttons to find and select the patient or asset whose transfer is to be extended.
4. Use the Increase or Decrease arrows to select the additional time needed to transfer the patient or asset.
5. Click Extend.
A dialog box appears showing the patient name and the number of minutes that the transfer is
extended.
FIGURE 3.20: Transfer Extended Dialog Box
6. Click OK.