User Manual

Chapter 4: Handling Events
90 Series 6.0 Software (0510-1065-A) - User Guide
White Alarms
The following sections provide detailed information about White Alarms, responding to alarming events, and the
way the event should be cleared. White Alarms are low priority alarms. They are displayed in the Alarm Message
Box and the Event List sequentially as they occur. White Alarms are displayed below Yellow Alarms.
Auto-enroll
The Auto-Enroll feature automatically enrolls alarming band transmitters into the system without requiring a
manual admit. Once the transmitter is auto-enrolled, the system monitors the transmitter for Door, Cut Bands,
or Check Transmitter alarms.
To respond to an Auto-Enroll
1. From the Client computer (s), click anywhere in the Auto-Enroll Alarm Message Box to access the
Event Information window.
2. Select one of the followings:
• Clear—clears the Auto-Enroll from the Alarm Message Box and the Event List.
• Admit—opens the Admit Information window for that transmitter so that you can assign the
transmitter to a patient.
• Close—closes the Admit Information window without clearing the Auto-Enroll.
To permanently silence an Auto-Enroll
1. From the Client computer(s), click anywhere in the Auto-Enroll Alarm Message Box to access the
Event Information window.
2. Click the Silence button. When an alarm is permanently silenced, a silence icon appears in the Alarm
Message box for that alarm.
Admit Complete
This alarm occurs when the Admit function for a patient is complete. This dialog box only appears if the software
has been configured to confirm the Admit.The Confirm Admit is configured in the Configuration, Global
Settings menu (refer to the Series 6.0 Software Administrator Guide).