User Manual

Chapter 1: Equipment Overview
16 Series 6.0 Software (0510-1065-A) - User Guide
Door/Window
A Door/Window transmitter is used to protect a door or window against unauthorized
egress. An Exit alarm event is reported in the Event List when a door or window is
opened. The alarm automatically clears when the door or window is closed.
The Door/Window transmitter comes in two pieces: the transmitter enclosure and a
magnet. The transmitter enclosure is mounted on the door/window frame; the magnet
is attached directly to the door/window. Separating these devices triggers an alarm. The
Door/Window transmitter is powered by a replaceable 3-volt battery.
Universal Transmitter
A Universal transmitter can be used to integrate your facility’s existing equipment such
as backup generators, pull-cord devices, or smoke detectors with the Series 6.0 Software.
Universal transmitters come as either NO (normally opened) or NC (normally closed)
devices. They automatically activate when the input from a monitored device has a
contact close or open respectively. When this happens, the Universal Transmitter sends
event information to the Central Server.
The Universal transmitter can be placed in the enclosure of an existing device or
inconspicuously mounted near the device. Be sure that the transmitter is not encased in
metal that might block the wireless signal to the Repeater or Receiver. The Universal
transmitter is powered by a replaceable 3-volt battery.