User Manual

Series 6.0 Software (0510-1065-A) - User Guide 39
The Main Window
Top Toolbar
The top toolbar contains icons that provide shortcuts directly to commonly used tasks
ADMIT—Click to access the Admit Information window. This is where you enter a
new patient or asset into the system. This selection is also used to update existing patients
or assets.
DISCHARGE—Click to access the Discharge window. This allows you to take a patient
or asset out of the census of monitored transmitters. If the patient is wearing an alarming
band transmitter, you then have a limited time to remove the banding material from the
transmitter. The discharge time is configured per unit or can be set to discharge the
patient or asset immediately.
ESCORT—Click to access the Escort window. This is where you select the amount of
time required to take a patient /asset out of a protected area and back to the same
protected unit.
TRANSFER—Click to access the Tr a n s f e r window. This is where you select the amount
of time required to move a patient or asset from one protected area to another protected
unit.
ADJUST—Click to access the Adjust Bands window. This allows you to temporarily
suspend the alarm function for a patient or asset’s alarming band transmitter so the
banding material can be readjusted. If there are no 9450 transmitters configured for the
system, this key is disabled.
REPORT—Click Reports to access a list of all available reports.
SILENCE—The Silence button enables you to silence an alarm only at the computer
where the Silence button is pushed. This Silence button is green when the Silence feature
is turned ON.
PREV MAP—Click Prev to scroll back to the previous map viewed. Only those maps
assigned to the units monitored on the Client computer(s) are available.
NEXT MAP—Click Next to scroll ahead to the next available map. Only those maps
assigned to the units monitored on the Client computer(s) are available.