User Manual

Series 6.0 Software (0510-1065-A) - User Guide 43
Chapter 3
Using the Software
Introduction
This chapter provides detailed information about the Series 6.0 Software functions. For information about tasks
such as adding devices or adding users to a Client computer, see the Series 6.0 Software Administrator Guide. In
addition, for specific information about securing and cleaning alarming band transmitters, see the appropriate
Transmitter User Guide.
Commonly Used Terms
Throughout this guide terms are used to describe functions that may be enabled/disabled in the software or
actions necessary for using the software. Following are commonly used terms and their definitions.
Login and Passwords
Some functions of your system may be password protected. This simply means that a staff member must enter a
login and password or use his or her proximity card or magnetic/barcode card before performing a task. When
you select a function that requires a password, the Login and Password dialog box appears.
To access a password protected function:
1. Enter your login name in the Login box.
2. Enter your password in the Password box.
3. Press Enter or click OK.
4. If enabled, use your proximity card or magnetic/barcode card approved for use with the software.
NOTE: The Login, Password and Swipe Card information is case sensitive. If a “User not
Authorized to perform this function” error message occurs, try tuning off the Caps Lock on
your keyboard.