User's Manual

Settings – Changes settings such as threshold,
ruleset selection, clearing the history, and
exporting the history to a CSV file.
Main Window Online
Working in Online and Offline Mode
• In the offline mode the Tag Entry
selection is made available. The Tag Entry
window makes the association between a
tag and its resource.
• In the online mode two additional
selections will appear: Download and
Upload. These selections assist in staying
synchronized with a PinPoint Mobile
Resource Manager software system.
Finding Resources
The Find Tags window appears in one of three modes.
Working offline using Resource Names
You must select a resource to search for by selecting its resource name from Resource
box. Department searches can not be performed when using the resource names.
To operate in this mode select the Use Resource Names checkbox in the Settings
window.
Working online using PinPoint Data
You select the location they are currently occupying and the tag to find. When tags
are received they are matched to a record in the local database. The database
information is used to provide additional details about the tag and asset. Department
searches can not be performed when working online.
Working offline using Dept and Tag
Select a department and a tag. In offline mode the user can select a department and
then “any” tag or a specific tag in the tag combo.
NOTE: In online mode the locations and resources are retrieved from the
PinPoint Mobile Resource Manager. Consult the section Integrating with
Mobile Resource Manager for details.
Programming Tags
To assist in categorizing assets and performing efficient searches
the tags can be grouped by programming a department id into
each tag. A tag must be blank before a new department and tag id
can be programmed into them. Any tag that is blank and receives
the write message will have the new ids set into them.
To erase a tag
1. On the Main window, tap Write Tags.
2 In the Department drop -down, select
a department ID number.
2. In the Tag box, select a tag id.
3. Click Erase.
4. Tag should beep indicating it has been
erased.
To write to a blank tag
1. In the Department box, select a new
department id.
2. In the Tag box, select a new tag id.
3. Click Write.
4. Tag should beep indicating it has
accepted the new values.
HELPFUL HINTS
Be sure to attach a label to the Tag that indicates its new department
and Tag ID.
The initial Tag ID can be determined by looking at the serial number
label.
DO NOT program two Tags with the same department and Tag ID.
9 14