User's Manual

617
To install the Seeker Software
Seeker Installation
Be sure the card is fit properly in the compact flash
connector.
The Receiver Card does not require a custom driver
and should communicate directly with the Seeker
Installing Software
1. Using your sync cable or cradle, connect your Pocket PC to the computer.
For additional information, see the documentation that arrived with the Pocket
PC.
2. Insert the software and documentation CD into the drive on the computer.
3. Using Microsoft Windows Explore or My Computer, navigate to x:\, where x is
the CD drive letter.
4. Double-click setup.exe.
5. Follow the instruction on the screen to finish the installation.
The Seeker application will be uploaded to the Pocket PC through the sync
cradle.
Installing the Receiver Card
To Install the Receiver Card
• Insert the Receiver card into the compact flash slot on
the Pocket PC.
application.
You can easily integrate the Seeker database with the PinPoint Mobile Resource
Manager software. This is a feature option that comes with the Seeker. For more
information, contact RF Technologies, Inc. at [phone] or [phone].
Service Settings
The PinPoint Services are required when
integrating with the MRM database. The
Services Tab in the Seeker application emables
you to configure the host name and port for
the PinPoint Services. A network connection
is created when the Pocket PC is placed in the
sync cradle. When download or upload is
selected from the main window, the Pocket PC
communicates through the network
connection and retrieves the data. To find the correct Configurator and Recorder host
names and port, see your PinPoint MRM Administrator.
To enter a host name and port
1 Tap Settings.
2 Tap Services
3 In the Host box, type the machine
name of the computer hosting the
service.
4 In the Port box, type the port
number used by the service.
Integrating with MRM