Owner`s manual

A. BEFORE LIGHTING, smell all around the unit

area for gas. Be sure to smell next to the ﬂ oor,

because some gas is heavier than air and will

settle on the ﬂ oor.

B. WHAT TO DO IF YOU SMELL GAS

1. Shut off the gas to the appliance.

2. Extinguish any open ﬂ ame.

3. If odor continues, immediately call your gas

supplier or the ﬁ re department.

C. Use only your hand to push in or turn the gas

control knob. Never use tools. If the knob will not

push in or turn by hand, DO NOT try to repair it.

Call a qualiﬁ ed professional service technician.

Force or attempted repair may result in ﬁ re or

explosion.

D. DO NOT use the unit if any part has been

underwater. Immediately call a qualiﬁ ed service

technician to inspect the unit and to replace any

part of the control system and any gas control that

has been underwater.

FOR YOUR SAFETY, READ BEFORE LIGHTING

1. STOP! Read the safety information above.

2. Press and hold the electric ignitor button. The

ignitor will begin to spark with a rapid clicking

sound.

3. While holding the ignitor button in, push in the ON/

OFF control knob to open the gas valve.

4. Continue to hold the knob in for 10-15 seconds this

will allow the safety valve to engage, and the main

burner will ignite and remain lit. After releasing the

knob turn the ON/OFF control knob to adjust ﬂ ame

height. If unit fails to light at step 4 after ﬁ ve (5)

seconds, STOP, turn control knob to OFF, wait 5

minutes, and repeat steps 2 & 3.

Note: If the burner will not stay lit after several tries, turn the gas control knob to OFF and call

your service technician or the gas supplier.

To turn the unit off, turn the ON/OFF valve fully to OFF.

Fig. 16-1

OPERATING THE UNIT - LIGHTING AND EXTINGUISHING

MANUAL (PIEZO) LIGHTING INSTRUCTIONS

WARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY

RESULT, CAUSING PROPERTY DAMAGE, PERSONAL INJURY, OR LOSS OF LIFE.