Owner`s manual

LIGHTING INSTRUCTIONS - REMOTE MODEL

FOR YOUR SAFETY, READ BEFORE LIGHTING

WARNING: If you do not follow these instructions exactly, a ﬁ re or explosion may result, causing

property damage, personal injury, or loss of life.

Do not use this appliance if any part has been underwater. Immediately call for a qualiﬁ ed professional

service technician to inspect the appliance and to replace any part of the control system and any gas control

that has been underwater.

BEFORE LIGHTING, smell all around the burner area for gas. Be sure to smell next to the ﬂ oor, as some

gas is heavier than air and will settle on the ﬂ oor. IF YOU SMELL GAS, FOLLOW THE INSTRUCTIONS

ON PG. 1.

LEARNADJ.

REMOTE ONOFF

Fig. 13-1 Remote receiver

MANUAL LIGHTING

1. Turn off any electrical appliance.

2. Press the remote receiver control to the ON position.

This transmits a rapid series of sparks at the pilot head

and will ignite the gas.

Sparks cease when the pilot ﬂ ame is lit and stable. After a

short time, the pilot will then light the main burner.

CAUTION: IF THE BURNER DOES NOT IGNITE WITHIN

20 SECONDS, TURN OFF, WAIT 5 MINUTES,

THEN REPEAT STEPS 1. AND 2. ABOVE.

If the pilot will not stay lit after several tries, turn the receiver to

OFF and contact a qualiﬁ ed professional service technician

or gas supplier.

REMOTE LIGHTING

1. Turn off any electrical appliance.

2. Press the remote receiver control to the REMOTE

position. Then press the ON button on the remote

transmitter. This transmits a rapid series of sparks at

the pilot head and will ignite the gas.

Sparks cease when the pilot ﬂ ame is lit and stable. after a